AFL FOCIS Flex Fibre Optic Connector Inspection System
- Ultra fast auto centres and auto focuses image
- Built in screen displays image and Pass/Fail result
- Pass/Fail analysis to IEC 61300-3-35, IPC or user set criteria
Fibre Cabling Test Equipment (201 products)
OTDRs are sometimes refered to as Tier 2 testers. They are capable of assessing a length of fibre to determine its length, the amount of loss and the location of events such as splices, connectors and macro bends, along the length of the fibre. Optical Loss Test Sets (OLTS) are Tier 1 testers that can be used to carry out bi-directional tests on fibres in order to establish their length and the amount of loss. MPO testers can test all 12 fibres on a MPO connector. Lower cost test equipment such as light sources, power meters, Visual Fault Locators (VFLs) and Live Fibre Identifiers are useful tools in finding faults on fibres. Fibre end face inspection is now vitally important in order to ensure that there is no contamination of the fibre end face that could cause high levels of loss.
201 products found in 74 groups.
AFL FOCIS Lightning2 Multi-Fibre Connector Inspection System
- Large, simple-to-use touch screen
- Self-contained, tether-free, compact, hand-held inspection solution
- Auto-focus and auto-centering for fast, easy inspection
AFL FOCIS Tips
- Tips for patch leads and bulkheads
- UPC and APC options
- 4 slot tips enable optimum orientation of APC bulkhead tips for easier testing
AFL Fibre Rings
- Provide accurate measurement of Insertion Loss
- Available in a range of lengths, fibre types and connector configurations
- Can't find what you're looking for? - Call or sales team with your specific requirements
AFL FlexScan FS200 SM OTDRs
- Fast, accurate SmartAuto OTDR network characterisation or fault location
- Easy to understand LinkMap results with pass/fail indications
- Rugged & pocket sized; <1 lb (0.4 kg)
AFL FlexScan FS300 Quad OTDRs
- Fast, accurate SmartAuto OTDR network characterisation or fault location
- Easy to understand LinkMap results with pass/fail indications
- Rugged & pocket sized; <1 lb (0.4 kg)
AFL FlexScan Optical Port Ferrule Savers
- Prevents damage to factory-installed OTDR ferrules
- Enables damaged ferrules to be replaced in the field
- Supports APC and UPC ferrules and connectors
AFL FlexScan TS100 FTTH PON Troubleshooter
- Locate faults in less than 3 seconds
- Displays link length, loss, ORL and Pass/Fail results
- Single ended test reduces time and costs
AFL FlowScout PON Optical Power Meter
- Detect multiple wavelengths automatically - no setup required
- Detects GPON, XGS-PON, and Video signals at the same time
- Rugged and water resistant design with IP54 rating
AFL Mandrels
- Required by TIA/EIA-568-B to measure attenuation on multimode fibre links
- Enables certification of multimode links for gigabit and 10-gigabit Ethernet
- Attaches to 3mm jumpers in seconds, without tools or tape
AFL OPM4-2D Optical Power Meters
- Rugged & dependable
- Wave ID (auto wavelength identification and switching)
- Power measurements in dBm or µW; insertion loss in dB
AFL OPM4-4D Optical Power Meters
- 850/980/1300/1310/1490/1550/1625nm
- Wave ID (auto-identification and switching)
- Multiple wavelength testing
AFL Power Meter Adaptors
- Simple screw fitting - no tools required
Bare Fibre Adaptors
- Easy to use
- Suitable for singlemode and multimode 250µm and 900µm fibres
- Lifetime tested: 1,000 insertions
ComSonics Light Sources
- Singlemode dual and triple wavelength options
- -5dBm Output power
- 5mm Spectral width
ComSonics Power Meter Adaptors
- Simple screw fit
- Easy to fit and remove
ETC Optical Power Meter
- Wavelengths [nm] : 850/1300/1310/1490/1550/1625
- Detection type : InGaAs
- Accuracy : + -0.01 dBm
ETC Visual Fault Locator
- Laser class: CLASS 3R
- Output power: >= 3mW
- Continuous use time: 13 hours
FiberPlus Bare Fibre Adaptors
- Accepts cleaved and non-cleaved fibre
- Quickly test fibre without terminating
- Internal replaceable cartridge filled with optical coupling compound
Fibre Optic Microscopes
- Lightweight, robust construction offering up to x400 magnification
- Includes 1.25mm, 2.5mm adaptors, a soft carry case and 3 x AAA batteries
- Momentary On/Off switch and fine focus controls
Shop by code
Enter the product code here to find your product: