Fibre Optic Cabling (1617 products)
1617 products
found in 487 groups.
The interchangeable anodised tool cassettes and covers are attached to a universal handle The handle locking mechanism ensures the tool remains closed during the sheath slitting operation The yellow label signifies 7.2mm diameter cable (typically a 96f Prysmian cable)
View 1 product
Overall dimensions: 228(W) x 125(H) x 90mm(D) Replacement blades available
View 1 product
Provides moveable links between sections of permanently installed horizontal cable Suitable for use in computer rooms, data centres and work areas Bend-Insensitive G657A2 (singlemode fibre)
View 1 product
High surface energy and low viscosity allows it to readily wet and wick between optical fibres. It develops strong adhesion to most materials used in fibre optics and optics, including metals, ceramics, glass and most plastics. High glass transition temperature results in excellent high temperature performance and creep resistance Resists moisture, vapours and most chemicals. It features low outgassing and low vapour pressure, making it an ideal sealing material for electronic and optical applications.
View 1 product
Available in single slot (719195) and dual slot (719196) variants to maximise number of cleans depending on connector type 400 cleaning positions per tape (800 positions for dual slot) Single slot version suitable for SC/MU/FC/LC/MT/MPO
View 4 products
Universal free floating pucks for 1.25mm and 2.5mm ferrule connectors Hold the connector ferrule perpendicular to the polishing surface
View 2 products
Non-combustable, safer to use Easier to ship and handle via land or air Water-based solution, cleans like alcohol and made with deionized water
View 2 products
Removes the need for alcohol use Safe to use, reduced odour and minimal vapor concentration Suitable for all gel filled cables including loose tube and ribbon fibre
View 2 products
Tube connection and tube sealing products enable tubes to be connected together and/or prevent the ingress of water or gas Blowing beads used with (EPFU) fibre and helps guide the blown fibre unit through tubes and aids installation Compatible with the range of blown fibre units and blown fibre tubing
View 7 products
Allows individual tube breakout and tube re-routing on vertical and horizintal planes
View 2 products
Manifold fits onto the back of PSP splice and patch shelves Takes up to 6 x 5mm blown fibre tubes Supplied with protective cover
View 1 product
Fibres already installed can be removed and replaced with a higher fibre count For use in 5mm blown tube with 3.5mm internal diameter Blowing distances up to 1000m (750m for 12 core)
View 2 products
Blowing distances up to 1000m (750m for 12 core) Fibres already installed can be removed and replaced with a higher fibre count For use in 5mm blown tube with 3.5mm internal diameter
View 3 products
Blowing distances up to 1000m (750m for 12 core) Fibres already installed can be removed and replaced with a higher fibre count Once removed, the fibres can be re-used at another site
View 9 products
Each tube is 5/3.5 (5mm outer and 3.5mm internal dia.) Rapid, dedicated customer connections Low friction internal coating for maximum fibre blowing distance
View 3 products
Also contains two sealing rings and two o'seals to provide an IP68 seal if needed Glands are available in 'End Port and 'Side Port' entry IMPORTANT: For Direct Buried Cable - the gland size selected must be based on the inner sheath diameter of the cable, as the outer sheath is removed before entering the closure to prevent water migration along the cable between the 2 sheaths
View 3 products
Each tube is 5/3.5 (5mm outer and 3.5mm internal dia.) Rapid, dedicated customer connections Low friction internal coating for maximum fibre blowing distance
View 3 products
Usage - 1 per tube connection Connects two 5mm tubes ensuring a continuous single tube over the entire route
View 1 product
Compact & attractive design for interior wall mounting On the front main cover a flip cover is available for an identification label Removable main cover for easy access
View 5 products
Micromodule flextube housing BendBrightXS fibres Suitable for installation in ducts, in buildings on cable trays, in corridors or in shafts Easy access to modules and fibres for traditional mid-span splicing
View 1 product
Shop by code
Enter the product code here to find your product:
