Air/Blowing Equipment (179 products)
179 products found in 39 groups.
Jetting Jetlogger Documentation System for V2 & V3 Machines
- ** Cannot be used with standard V2 & V3 machines (please check if uncertain) **
- Individual input describing the job, cable and pipe/duct
- Automatic input of temperature, humidity and the exact position by GPS
Jetting MJET V0 HD MJet Fibre Blowing Machine
- Electrically operated. Battery connected
- Allows installation in a larger duct with a smaller compressor
- The motor does not consume any airflow itself
Jetting Microduct Lubricating Projectiles (Sponges)
- Available for microducts with inside diameters from 3.5mm-35mm
Jetting TriggAir Accessories
- 827819 - Tripod with inbuilt hose connection
- 827820 - Reel arm accessory
- 836537 - Table Mount Bracket with hose connection
Jetting TriggAir MJet Fibre Blowing Machine
- Electrically operated. Battery connected
- Fibre security by mechanical clutch and adjustable clamping force
- Forward and reverse
Jetting V2 MJET Fibre Blowing Machine
- Joystick operation with forward and reverse direction
- Pneumatic motors running off compressor power alone
- Gentle operation with long contact surface area on the cable
Jetting V3 MJet Fibre Blowing Machine
- Joystick operation with forward and reverse direction
- Pneumatic motors running off compressor power alone
- Gentle operation with long contact surface on the cable
Jetting Y Block
- Supplied with 25mm jaws as standard
- Additional jaws for further sizes are available
- A 25mm tube is connected between jetting machine and Y block
Kaeser M17 Aftercooler Accessory
- External Aftercooler for use with Kaeser M17 Petrol Compressor
- Water Separation
- Accessory to be used with Kaeser M17 Compressor
Kaeser M17 Petrol Cable Blowing Compressor
- Kaeser M17 Standard petrol compressor supplied with No after cooler or water separator PN 834900
- Kaeser M17 petrol compressor supplied with after cooler and water separator PN 825653
- Kaeser M17 petrol compressor supplied with after cooler - water separator and filtration system PN 834844
LastMile Fibre Optic Blowing Compressor (Petrol)
- 3HP - 3000rpm Petrol engine
- 9.5CFM (270 litre per minute) air flow rate
- 145psi (10bar) Max. pressure
M27PE Compressor Towable (14Bar) Pressure
- Diesel 3 cylinder Kubota Engine
- 14 Bar @ 1,600L/M
- Built in compressed air aftercooler cools the compressed air to 7 degrees above ambient. Any accumulating condensate is reliably drained away.
PCL Bayonet Airflow Connectors
- Positive locking mechanism
- Nominal bore: 4.8mm
- Maximum flow rate: 43cfm @ 100lbf/in
Polywater Blown Fibre Cable & Duct Lubricants
- Prelube 2000 suitable for lubricating fibre cable and ducts
- Prelube 5000 suitable for lubricating micro fibre cable and microducts
- FTTX Spray Lubricant makes the installation of fibre drops easy. Spray or wipe the cable or conduit. Quick and easy to use without mess or excess lubricant
Rotair VRK20 Armadillo Cable Blowing Machine Compressor
- Built in aftercooler
- Automatic optimum air flow delivery - the unit will automatically adjust the air flow to optimum volume, this reduces stress on the engine and improves fuel efficiency
- Max operating pressure 15bar / 218psi
Tracer Wire
- Tracer wire can be connected to a standard signal generator and identified using a standard CAT
TriggAir Tripod Carry Bag
- Full length zip fastener for easy access
- Carry straps with padded handle
- Also includes a compartmental divider which can be removed
Shop by code
Enter the product code here to find your product: