Wrecking Bars
- Claw & chisel ends
- Weight: 1.09Kg
2566 products found in 965 groups.
Fixing Band - Galvanised
- Four different hole sizes; 3.75mm (round), M10 (round), M8 and M10 (square)
Duct Seals Rope blowing
- All sizes fit over the same Handle Assembly and changing the size of seal used is straight forward. Just unscrew to nuts, slide off one Seal kit and slide on the next one.
600W Sine Wave Inverter
- Over 85% efficiency
- Soft start minimises inverter shutdown when using large inductive loads
- Low/over voltage input protection
Tracer Wire
- Tracer wire can be connected to a standard signal generator and identified using a standard CAT
Heavy Duty Gel Knee Pads
- Sewn cap to prevent debris from getting underneath
- Comfortable gel padding lets you work longer
- Rugged hard caps protect against rough surfaces
Inflatable Birds
- Inflatable Birds for ducts from 3/4" to 6"
Trench Measuring Stick
- Clearly shows 100mm depth increments
- Measures for walkway depth up to 1.2m
- 1200mm (H) x 195mm (W)
300W Sine Wave Inverter
- Over 85% efficiency
- Soft start minimises inverter shutdown when using large inductive loads
- Low/over voltage input protection
Hypocut Aerial Drop Cable Clamp
- Designed for Corning ROC drop and CommScope EX AXS drop cables
- Easy, quick and tool-less installation
- Opening bail for installation onto closed or opened hardware
Aluminium Work Platform
- Folding legs for convenient storage with anti-skid feet
- Locking hinges with wide non slip platform
- Maximum load of 150Kg
6 Piece VDE Screwdriver Set
- Slotted 3" (75mm) x 2.5mm, 4" (100mm) x 4.0mm, 5" (125mm) x 5.5mm
- Phillips 3" (75mm) x No 0, 4" (100mm) No 1 and No 2
- All supplied in a plastic carrry case
200mm Tin Snips
- Accurately ground blades with a nut and bolt joint design
Compact Dropout Unit
- 11 cfm flow rate
- 16 Bar Maximum pressure
- 99.9999% liquid water removal
Spacer Set
- 2x M6 x 25mm Nylon Spacers (Male / Female Brass Inserts)
- 2x Serrated Flange Nuts and Pozi Pan Screws
- Supplied in a pack
First Aid Kit - Van & Truck
- Ideal for van and truck drivers and employees who are on the move
- Contents include;
- 1 x Guidance leaflet
Socket Driver Set
- 65mm long 1/4" & 3/8" square drive & 72mm long 1/2" square drive
- 1/4" hex, drive quick change shank
- Note: This product is not Impact Grade therefore not suitable for use with high torque Impact Drivers
Caution 'NO STEP' Mobra Labels
- Made from a high-tack waterproof vinyl
- White panel for additional user info to be added
Fork Terminals
- Low insertion force and easy crimping, whilst ensuring secure termination
Singlemode OS2 Coloured Pigtails LC/APC
- Pack of 12 coloured fibre pigtails
- Bend-insensitive G657A2 (singlemode fibre)
- Strain relief boot to protect fibre
Shop by code
Enter the product code here to find your product: