Brand opt - Brand opt - Comtec Direct

A profiled roller, located either side of the rotary blade ensures the internal cable elements are not damaged during the stripping operation
Handle locking mechanism ensures the stripper remains closed during the sheath stripping
Wrist strap and user instructions supplied

View 3 products

The interchangeable anodised tool cassettes and covers (label coloured blue for this variant) are attached to a universal handle mechanism
The handle locking mechanism ensures the tool remains closed during the sheath slitting operation
A wrist strap and user instructions are supplied with each tool

View 2 products

Each cassette contains a single rotatory blade which is located on the handle mechanism, as a pair the blades are diametrically opposite each other
These blades cut through the outer sheath to expose the cable element, ideally using the yellow stripe(s) as a guide to prevent the blades coming into contact with the strength members
A profiled roller is located either side of the rotary blade to ensure the internal cable element is not damaged during the stripping operation

View 2 products

An insert is supplied to enable 5x 3.5mm 7 blown fibre tube bundle to be accessed in the same way

View 1 product

The interchangeable anodised tool cassettes and covers are attached to a universal handle
The handle locking mechanism ensures the tool remains closed during the sheath slitting operation
The yellow label signifies 7.2mm diameter cable (typically a 96f Prysmian cable)

View 1 product

View 1 product

View 1 product

The sheath splitter design will allow end and mid-point cable access
The sheath splitter is ergonomically designed to fit into the engineer's hand whilst providing adequate grip to draw the splitter along the cable sheath
Designed for a minimum of 500 x 1Mtr cuts

View 1 product

Can be attached to a wooden pole with 4x No.8 x 1" countersunk pozi wood screws (820139)
Designed to form a 'bridge' over other cables fitted to a pole

View 1 product